Interior Brick Sealer & Dustproofer - Seal, Dustproof & Protect Interior Brick & Masonry (5 Litre)

Product Information

The surface becomes darker and unattractive. Over time excess trapped moisture darkens the surface. Our clear stone wall sealer, by contrast, is an advanced water-based fluoro-carbon which leaves no visible trace. It effectively repels liquids to protect the appearance of your stone surfaces without darkening. Liquids "bead up" on the surface and are not absorbed into the substrate, thus protecting your stone against staining. Suitable for interior sealing of: That is a question we get asked often and generally it is more expensive than internal but does so much more and is not marketed as decorative but PROTECTIVE because remember, your walls outside get a hammering from the weather. Our couriers do not deliver on a Saturday or Sunday (or bank holidays) other than by special additional arrangement. Some sealers only need a single coat for them to work properly, while others may require two, or even more coats. This is an important consideration for two reasons. On the one hand, fewer coats make the application process much easier – especially if you are covering a very large area. A single application is also much cheaper because you need to use half the amount of sealant. This is something to know before buying your sealant because it will help you to determine how much you need.

However, it’s not the best idea to get too big of a container as it can get wasted if you don’t need it in the first place. That’s why you need to identify the length of the surface that you are going to be working with and choose the quantity of the sealer according to that. If you have beautiful masonry and stonework on your property, you know the struggle to keep it looking good. Besides throwing up tarps every time it rains, the best option is to protect the surface with a sealer. Many homeowners do not realize how much a sealer can help, so they forgo the option. Once the above is done, lightly brush the wall with a soft broom head or old emulsion brush to get rid of dust. We follow a detailed, rigorous process to create content that is helpful, factually correct and meets the highest standard of integrity. Store indoors in a cool dry place. Shelf life of Kingfi sher “Stone Sealer” is approximately 12 months from date of manufacture.Importantly, although the product can be used throughout the year, try to avoid temperatures below 10°C. Only apply when realistically you would expect an external surface to dry. Avoid damp, cloudy days with no drying wind. Always remember that the surface needs to dry a few millimetres deep. Certainly, any moisture still present just below the surface will stop the product from penetrating correctly and reduce or neutralise its effectiveness. Stormdry only requires one coat, and we found that it was touch-dry after a few hours and water repellent after two days and largely water resistant after 28 days.

Always apply the sealer evenly in thin layers, and don’t let it pool. You will need the coating to be completely even for it to dry to a clear, smooth finish.

2. Application

Rain and Wind: If it is raining while it is windy, the rain will come in at a horizontal angle, which makes it easier for the rain to penetrate crevices. A sealer will help combat this additional threat. Some sealers can be used inside and outside, but others are only designed for one setting. Consider exactly where you use the sealer and select an option that matches accordingly. If you are using sealer outside, ensure it is safe for the environment. Sealants are environmentally friendly and are proven to be very effective for over 10 years. The right sealer will protect the surfaces natural appearance, all the while offering outstanding protection against water, chemicals, dirt and sunlight. Using Clear Sealants to Waterproof Surfaces

Make sure that you get the best one that you can afford. That’s going to ensure a hassle-free service and you don’t need to go and reapply the coat over and over again. The Quantity of the Sealer If spraying use only manual pump sprayer with large droplet nozzle. DO NOT MIST EU limit value for this product (cat.A/h): 30 g/l (2010) This product contains max. 1 g/l VOC.In addition, our company offers several solutions if your house suffers from damp and mould, and if it has a scruffy external appearance, then we would suggest our exterior wall coating system which is guaranteed for 20 years. Another great thing about this seal is that you won’t have to clean your walls constantly once you apply the seal. It’s going to prevent the moss buildup and also help to fight dirt, which is a great thing. Dependent on the porosity of the surface 1 litre of product should cover approximately 4 to 6 m2 . STORAGE / SHELF LIFE

Remember that everyday living and breathing ensures that moisture is always generated within a home. It is therefore essential that all sealers allow this moisture to escape. After sealing your surface, use soapy water or mineral spirits to clean out the sealer from the pump sprayer. You may also want to read the manufacturer’s instructions for other cleaning tips. Also, a good quality sealer has a lot of great features that you can benefit from that you can’t find on the cheaper alternatives. Freezing and Thawing: Freezing and thawing can cause property damage to floors and walls, especially in locations prone to heavy winters. A sealer will prevent water from getting into your surfaces.

Brick Waterproofer

We have adjusted the formula of this impregnating sealing product to improve application and sealing performance. Tools and equipment should be cleaned with warm soap and water immediately after use. DO NOT allow to dry before cleaning. HEALTH & SAFETY PRECAUTIONS After waiting about a day for the surface to dry, fill up the pump sprayer with your sealer of choice and spray it onto the material. Be sure to spread any runs or drips while they are wet with a paint roller. Allow the sealer to dry however long the instructions say before adding a second coat. Now that all of the loose bits and rough spots were removed, it was time to remove actual soil. We started this step of the process by laying drop cloths around our work area to protect our newly finished floors. Next we liberally sprayed a 4:1 ratio of Simple Green over small sections of chimney and allowed it to sit for a couple of minutes. Unit 1 stairs to lower level