5 L Wood Protective Treatment Light Brown

Product Information

A high-quality, low odour oil/Spirit wood preservative which is deep penetrating. Barrettine wood preserver is used for wood protection against wood destroying fungi (wet rot), wood discolouring fungi and wood boring insects. Provides a semi-transparent matt/satin finish allowing the natural wood texture to be visible. Can be used on pressure treated wood, treated timber or untreated wood. Suitable for rough, sawn or smooth timber, does not require over sealing for wood protection.

What is the difference between Barrettine Wood Preserver, Wood Protective Treatment and Universal Preserver? The colour swatches are an indication only and representative of the product applied to clean new/pale timber and rough sawn pine (2 coats). The final colour finish can vary considerably due to the age, type & condition of the timber being treated and will darken with multiple coats. Viewing colours on multiple digital screens can vary considerably and may not be totally accurate. We always recommend carrying out a small inconspicuous test area first. It is the Customer/end users responsibility to satisfy themselves that the colour finish is correct before full application. Smooth Pine (2 coats) For use on bare wood which will be over-coated, for example with Barrettine Log Cabin Treatment or opaque paint, or physically protected from the elements. Ensure that wooden surfaces to be treated with Barrettine Wood Preserver are clean, dry and free from surface dirt, debris and other surface contaminates. New Bare Wood Always do a test area before starting any project and follow the manufacturer's instructions on the tin at all times. Only apply in temperatures of between 10°C and 30°C. Shake or stir well prior to and during application to ensure a consistent colour.

Similar products

Wood that has been oiled in the last year should be allowed to weather for at least one year or until the wood preservative is able to penetrate through to the timber The sprayer must be thoroughly cleaned after application with white spirit and then oiled to protect the tip and moving parts (as per manufacturer’s instructions). This product cannotbe sprayed with a traditional pump action garden sprayer. No subsequent topcoat is required unless for aesthetic purposes. Barrettine Wood Preserver is for outdoor use and also for use on windows/frames, external doors/frames (internal & external sections). The Barrettine Wood Preserver Clear can also be used on structural timbers in unoccupied areas such as floor joists. This wood preserver provides a semi-transparent matt/satin finish allowing the natural wood texture to be visible, it can be used on pressure-treated wood, treated timber or untreated wood. This high-quality wood treatment is suitable for rough, sawn or smooth timber, does not require over sealing for wood protection.

Areas that have been affected by mould, algae or fungi should be treated with Barrettine Mould and Mildew Cleaner NOTE: Before overcoating, allow the wood to fully ‘weather’ after applying the preserver. This is especially important for water based paints as the wax contained in the preserver will repel the water and prevent adherence of the paint. The ‘weathering’ process can take several months. Tips Freshly cut sawn ends should be thoroughly treated with either Barrettine Premier Wood Preserver, or alternatively Barrettine End Grain Preserver It should be noted that the above products are preventative treatments and these products are unlikely to kill/control mould spores already present within the wood. If this is suspected, Barrettine Mould and Mildew Cleaner should be used, prior to coating the wood. The bottom of wooden structures e.g. sheds will also require more frequent treatment with Mould and Mildew Cleaner, as the action of rain splashing on the ground will distribute mould spores onto the wood. Frequent treatment with Mould and Mildew Cleaner can prolong the life of the wood coating. Also, repeat and periodic re-treatments using the above wood care products will enhance and protect the appearance, and prolong the life of the wood. Barrettine Premier Wood Preserver is a high-quality, low odour, oil based wood preserver that is deep penetrating. Barrettine wood preserver is used for wood protection against wood-destroying fungi (wet rot), wood discolouring fungi and wood-boring insects. This wood preserver provides a semi-transparent matt/satin finish allowing the natural wood texture to be visible, it can be used on pressure-treated wood, treated timber or untreated wood. This high-quality wood treatment is suitable for rough, sawn or smooth timber, does not require over sealing for wood protection. No subsequent topcoat is required unless for aesthetic purposes. Barrettine Wood Preserver is for outdoor use and also for use on windows/frames, external doors/frames (internal & external sections). The Barrettine Wood Preserver Clear can also be used on structural timbers in unoccupied areas such as floor joists.Areas affected by mould, algae or fungi should be cleaned with a stiff brush or scraper then treated with Barrettine Mould and Mildew Cleaner Barrettine’s Wood Protective Treatmentis a wood sealer for rough, sawn or smooth timber. It contains water-repellent resins that help reduce decay, swelling, and twisting of wood. Its pigments have good UV fade resistance and will help protect the wood from UV damage. We also deliver to the majority of non mainland UK locations including The scottish Highlands & islands, Isle of Man, Isle of Wight, Isles of Scilly and Northern Ireland. Please see full delivery terms for the extra charges associated with these locations

Provides non-biocidal protection, nourishing the wood and repelling water ingress that can cause decay. Less protection is given than Barrettine Wood Preserver Barrettine’s Wood Protective Treatment: - is a wood sealer for rough, sawn or smooth timber. It contains water repellent resins and a biocide film wood preserver to prevent the surface growth of mould/algae and together this helps reduce decay, swelling, twisting of wood. Pigments have good UV fade resistance and will help protect wood from UV damage.

Can be sprayed usingan airless sprayer such as a Wagner or Graco ideally using a minimum 1mmflat fan tip nozzle (9 – 11 thou tip). Barrettine Wood Protective Treatment• Provides non-biocidal protection, nourishing the wood and repelling water ingress that can cause decay. Less protection is given than Barrettine Wood Preserver Suitable for rough, sawn or smooth timber, Barrettine Wood Preserver does not require over sealing for wood protection so can stand alone. It can also however, be used as a preservative base for overcoating with protective treatments, wood oils and oil based paints or varnishes, for aesthetic purposes (allow for weathering period). If using as a stand alone product, seven colour shades are available. Product Highlights If protecting the natural colour of the wood is important, use the clear preservative then overcoat with Osmo UV Protection Oil Extra or Fiddes Exterior High Build Wood Oil.