Liberon Decking Oil 5 Litre - Clear

Product Information

Give it a goo while to dry – you can’t just rush in. I left my timber to dry for nearly a week as it had been thoroughly soaked and was damp for a fair while in places the sun doesn’t reach much. Obviously if you’re directly exposed to sunlight your timber will be ready to go much faster. I do warn though, don’t get too close or you risk ripping the grain and making it furry!

After 20 minutes, apply another thin coat of oil on top of the coat already applied and then remove the excess oil with a cotton cloth. This will ensure the timber has soaked up enough oil to provide good protection. Then leave the area to dry for at least 24 hours before use. Oil is also really durable and is easy to maintain – you just need to keep it clean and touch it up every now and then. It’s very resistant to dirt and water so doesn’t require much upkeep at all.'

Latest articles

With your gloves on, shake the solution, pour it out into a suitable container, then stir it up using a paint brush. An hour after the second coating has gone on, test out a patch by scrubbing it thoroughly with a scrubbing brush – make sure that the stain has been removed completely. Don’t panic, it’s a bit lively looking for the first week or two and then it’ll settle down to the colour you can see above 🙂

It is vital when using stripper or bleacher to neutralise the wood thoroughly before applying any finishing products. We recommend Wax & Polish Remover to neutralise stripper and bleacher. Allow to dry for at least 24 hours before commencing the wax, oil or varnish process. When using water-based varnishes wood bleacher must be rinsed thoroughly to remove all residues. I have stripped the wood but the finish I have applied has not taken to the wood properly and has dried streaky. What should I do? We will be happy to organise an exchange for the correct goods at no extra charge to yourself, please get in touch to organise this. Faulty Items One thing you’ll notice is the busier areas will fade first, sorry for pointing out the obvious but it was more in relation to the manufacturer comments with regards to UV filters – you have no worry at all about this product failing through sunlight, the wear and tear is the only issue with oils. Wood has naturally occurring oils which seep out – as will this oil, or any other you choose from the review for that matter. Pros:

The age of the wood. Newer wood will have a higher moisture content and be tighter grained, allowing less oil to be absorbed than older wood which will look darker with the same oil. Apply the stripper to the first section using long, even strokes. Do not walk on a section that has stripper on it.