Hammerite Stone Chip Shield. Spray Shield Underseal Metal Paint for Cars. Underbody White Metal Paint. Rust Resistant, Durable Automotive Paint, 8 Year Protection - 600ml Aerosol 1.5 SqM Coverage​

Product Information

For metallic or pearlescent finishes allow your colour match paint 24 hours to harden before applying the Clear Protection Lacquer in stages allowing 10 minutes between each coat. Features & Benefits:

Scratches, chips and scrapes in your paintwork don’t just look bad, they can affect the resale value of your car. Whether you’re undertaking a full restoration, or just want to do some DIY-detailing, you’ll find all the car scratch repair and car paint repair products you need at Halfords. Our range includes: Car touch up paints Should you make a mistake, panic not! Simply use the Step 2 Blending Solution and start again. Easy. Clean the paint stone chips and surrounding area thoroughly. Make sure that you remove any sealant, wax or polish from the chip area. You can use a bit of the Blending Solution for this job.

\n\t\t\tIsopon Stone Chip Protector Aerosol 450ml

Note: drying time takes between 40 seconds and 5 minutes, depending on the ambient temperature and amount of paint you've applied. 4. Once the paint is dry to the touch, apply the supplied Step 2 Blending Solution to the paper cloth, and wipe across the painted areas with a light pressure - simply allowing the solution to do its job without any excess pressure. Allow a few minutes for the blending solution to dry before the next stage. 5. Take the Step 3 Finishing Polish, apply a small amount to a soft microfibre cloth and rub gently across the painted areas. Allow this to dry and haze, and then remove the haze with a clean area of the cloth.

This is exactly what happened to me, look brilliant (to me at least) then a week or two later they all appeared. It was the second polish i had given it and the only change was Using SRP. Looks like that product is off the list! To deal with chip damage, we’ve produced our own range of chip, and car scratch repair pens. You simply pop the cap and cover chips and heavier scratches. As the paint dries, it blends in with the finish of your car, making scratches and chips disappear. If your windscreen has become damaged at the same time, you can book a windscreen chip repair Recommended products to use after using the Chipex kit include our Super Concentrate Car Shampoo and our Miracle Detailer. They will start to 'bubble' once water gets underneath the paint, which will lead to rusting and further surround damage to that area A tough, flexible corrosion and chip resistant coating for all-round protection with excellent sound deadening qualities. Suitable for all lower body panels vulnerable to stone chips. Stonechip is not suitable for use on synthetic painted surfaces.Put on the rubber gloves that come with the kit. These are actually used in the application of the paint. Try polishing the area with something that doesn't produce much powder so SRP probably isn't the best choice, then try a different wax then you did last time, assuming you waxed the car (you should have!). Lightly rub down using abrasive side of special tool to achieve a smooth finish, then apply your colour match using the precision nib applicator or brush to the prepared and primed chips or scratches. Build up the colour in stages by leaving 10-20 minutes between each coat*. Leave the paint for 24 hours to harden then simply buff the surface using fabric side of special tool to blend in the repair. If you've applied the Chipex system correctly, your stone chip repair should be a success, and you'll hardly notice where the ugly marks had been. You've also protected the area from rust and bubbling - brilliant! The touch-up paint is the ideal way to repair small unsightly scratches and stone chips on your cars bodywork, blending them in with an exact colour match.

The 3M™ Accuspray™ atomising heads / nozzles, pressure and material flow, allows for different textured coatings to be applied, meaning you can easily match several different OEM textures to get the finish you need. The 3M™ PPS™ Pressure Cup takes air vented from the spray gun and pressurises it to ensure high viscosity material can be sprayed evenly. Pressurising the pot helps the bag to collapse and release the material in the required texture with the 3M™ Accuspray™ Pressurised HGP Spray Gun and 3M™ PPS™ Pressure Cups.

Features

Shake the paint Step 1 Paint bottle well, and then use the supplied Chipex paint applicator brush® to dab the paint onto the chipped areas. If the car has suffered 'road rash' (lots of small paint stone chips in one area), put the paint onto a fingertip of the glove, and smear evenly across the road rash, making sure they are all filled.